How to tap a kegerator

DO NOT lower the lever. This plug is concealing the hole into which the tap will rest.

How To Set up a Kegerator Step One.

How to tap a kegerator. Guide to Tapping Your Keg in a Kegerator Before tapping the keg you want to give it some time to settle in the kegerator and reach the proper serving. The next step is tapping the keg. Make sure that you have the right type of keg coupler for the beer youre serving.

Next open your Co2 tank and. This is a short video on how to tap a keg with a D-system coupler for your kegerator. It also shows you how to set the pressure of your CO2 tank and how to p.

Insert the tap into the opening at the top of the keg. Make sure the notches are lined up and push the tap in. DO NOT lower the lever.

I see many people make the same mistakes on their first few kegs. Here is a few tips to help you stay clean and save your beer from foaming. Step-by-Step Instructions for Assembling Your Kegerator.

Follow these step-by-step instructions for assembling your kegerator and installingtapping a keg inside of it. Before beginning make sure the unit is empty including the white metal keg floor 11. Then carefully tip the beer dispenser on its side.

Place the toggle shut off valve into the closed position or upwards and set it aside. To ensure the tapping process goes by smoothly place the canister in the upright position. Go grab the hose clamp and place it over the opposite end of the air hose before attaching it to the keg coupler gas inlet port.

Put the faucet back together and reconnect it to your kegerator by turning the coupling nut counter-clockwise. Make sure the sealing gasket is back in place. Connect the keg coupler to the beer line and CO2 hose.

Turn the valve back to on and then re-tap your keg. You can mount the taps on the side of the fridge or straight through the door and use the refrigerator as normal when you dont have any kegs to dispense. If you mount the taps on the front through the door make sure you mount them low enough so your tap handles arent in the way of the upper freezer door.

The stainless-steel tower of the system is relatively heavy so reinforce the plastic lid with some plywood. Use a pair of pliers to break off the ridges on the bottom of the lid and then sand them. Search for the model number on Google along with kegerator Someones probably converted it before.

Spread a mixture of cornstarch and alcohol on the ridge. Then turn it on. If you bought a kegerator all you need to do to tap your keg is supply a full keg of beer and fill the CO2 tank.

However if you are wanting to convert an old refrigerator or freezer into a kegerator you may need a couple of components. If you are a beer lover and have some free time heres a step-by-step video tutorial from The Beardyman Craft Beers showing how you can put together your own kegerator from a second-hand fridge brought for 30 and beer tap faucets for 18 online. Rather than leaving it as a giant hole in the wall he added some trim around the tap box to make it blend in nicely.

Just wait until you see it all done. Buy one of our kegerator to make your at home beer drinking experience more like the local bar. With a draft beer kegerator your favorite beer can be on tap and seconds away anytime you want.

Our most popular draft beer refrigerators are shown below. We also have 2 3 4 keg dispensers available. Please contact us for a quote.

How To Set up a Kegerator Step One. Install the Top Railing Perfectly fit in the top railing on the kegerator without the use of tools. Make Installations of the Draft Tower A normal kegerator comes with an inbuilt plug that will cover the hole.

Make the Addition. Use the spanner wrench and rubber washer when securing the faucet tap in place for a firm attachment to the kegerator tap tower. The spanner wrench will fit directly into the holes on the side of the beer faucet.

This will help to avoid any leaks in your draft system. Finally turn the kegerator over to its original upright position. Removing the Top Plug.

With the kegerator in the upright position you will notice a plug on the top side of the unit. This plug is concealing the hole into which the tap will rest. Removing this plug can be accomplished in one of two ways.

A part and parcel of a kegerator is a CO2 tank which allows beer to be force carbonated and then dispensed under pressure. The CO2 tank can be located both inside and outside of a kegerator. Depending on the type of beer served the CO2 gas may be replaced with a beer gas or pure nitrogen.

Place the draft tower on top of the opening and secure it with 4 mounting screws. Feed the air hose into the draft tower from inside the cabinet. The air hose helps to keep the beer cold as it travels up the beer line.

Screw the tap handle onto the tap faucet.